|
1, the manufacturing standards: National Building Standard Design Atlas 02S101
Modular stainless steel water tank design relevant parameters, is formulated in accordance with the relevant provisions of the existing "building water supply and drainage design specifications" in. 2, water tank SUS304, SUS316L such as stainless steel plate, stamping molding. High quality stamping process, both to ensure the housing needs maximum pressure, but also reduces the thickness of the material, with high strength, light weight, and can better prevent secondary pollution of water, environmental sanitation. High strength plate stamping and distribution of steel reinforcement inside the box under pressure to make even reasonable. 3, modular stainless steel water tanks combination of three main standard module is made; by the 1000 × 1000,1000 × 500,500 × 500 standard blocks, depending on the design parameters of the three-dimensional structure, the use of different thickness module, in the factory or spot welding assembly site using TIG welded wire selection ER308, H0Cr21Ni10 stainless steel wire, by pickling weld surface passivation to ensure durable weld corrosion, chassis hot-dip zinc Q235-A carbon steel channel. 4, the product according to customer requirements, design 1-100m3 the square modular tank. 5, the tank inlet, outlet, overflow, outfall and into the hole, its size and location determined by the design. 6, the product is used as a hot water tank or expansion tank, the seal must be heat-resistant seal. 7, holding tanks, according to customer requirements, using different materials and processes. 8. Installation Instructions a, tank foundation requires Concrete foundation geometry should GB02S101 relevant provisions making. Concrete foundation plane height difference <5mm b, stainless steel water tank installation, construction and acceptance Professional TIG welder scene. Construction site with a standard power supply. Tanks surrounded ≥500mm maintenance space. Visual inspection no rust, no pollution: filled with water 2-3h, Case no significant deformation, weld no leakage in compliance. c, water tank use, repair and maintenance When piping, do not applied to the inlet and outlet piping excessive load. Do not place the weight of valves and large diameter pipe is directly applied to the tank outlet, set the pipe support when necessary: for welded pipe expansion, contraction, vibration must be installed retractable flexible joints. Stamping stainless steel plate welding of stainless steel tanks punched out ribs, and with stainless steel bars welded together, simple structure, good strength, can produce larger capacity tank. Because cabinet made of stainless steel welded, completely blocking the exposure to sunlight, it will not breed algae. So that water is always kept clean. |
News
| News |
| Contact |
|
Dongguan Zhuangyuan stainless steel water tower factory National service hotline:4008-3737-88 Address: Dongguan City, Da Lingshan Wan Long Road (large village) Dalingshan police brigade 200m E-mail:1651856382@qq.com No. QQ:1651856382 Tel:0769-81626031 Fax:0769-81626032 Phone:13326878298/13380111889 Contact:Mr. Chen Website:www.gdzystc.com |
|
|
Technical Support
Modular stainless steel water tank manufacturing standards and thickness specifications
Source： Time：2015-04-08 09:40:19 views：
1, the manufacturing standards: National Building Standard Design Atlas 02S101 modular design of the parameters of stainless steel tanks, is established in accordance with the relevant provisions of the existing "building water supply and drainage design specifications" in.